Electric Brass Solder Soldering Iron Tip Leather Crafts Press Edge Sealing Tools

Description

Electric Brass Solder Soldering Iron Tip Leather Crafts Press Edge Sealing Tools
Description:
Controllable temperature range: 200~450 degrees Celsius
Specification: single head, 1mm,1.5mm,2mm, 3mm, 4mm,5mm,7mm,9mm,
Voltage power: 220V 60W
Product features: handle temperature is low, feel light, electricity can be a minute tin welding, automatic temperature, temperature recovery. The heating element is easy to be replaced, the efficiency is high, and the power consumption is low.
Note: please pay attention to safety in use, to prevent burns.
Instructions for use:
1, positive and negative cut edge, so that the edge of the leather becomes smooth;
2, along the direction of the crop edge of polished leather;
3, after grinding smear sealing liquid;
4, because after the cut edge of the leather edge is a semi-circular, so the side should also apply sealing liquid;
5, waiting for the closure of semi-dry after grinding;
6, the use of electric iron iron back and forth, making the closure of liquid penetration evenly, repeat 3-5 steps can be;
7, complete.
Edge effect:
1, leather side smooth and shiny;
2, leather edge with a soft, curved edge will not crack;
3, wear, even with a nail scraping edge, it will not fade.
Use of soldering iron:
1, the use of a screwdriver to remove the original tip, the installation of copper head, (pay attention to ensure that the copper head into the deepest);
2, the temperature adjustment at 200 degrees Celsius, and then plug in the power (the first time you will use white smoke, which is normal, the future will not appear);
3, the red light will light up, wait for some time, it will go out, on behalf of it is the state of constant temperature;
4, once again adjust to the temperature you need, the indicator light will be lit again,after it go out again,  the temperature is equal to the temperature you adjust .
Package Included;
1 x Piece Electric Brass Solder Soldering Iron Tip/ Soldering Iron